Fizik Cyrano Range

The Cyrano R1 Handlebar

cyrano-handlebar_r1_bull

The Cyrano R1 is the mid-range handlebar from fi’zi:k. Made from uni-directional carbon, this is both strong and lightweight. The same Spine Concept™ guidelines that helps you choose your saddle is used to find your most comfortable handlebar shape.

Top Features of the Fizik Cyrano R1 Carbon Road Handlebar

Spine Concept™ guidelines to help you choose your most comfortable road handlebar shape
31.8mm Clamp Diameter
Availble in three different drops and reach
Snake: Reach 85mm, Drop 140mm
Chameleon: Reach 85mm, Drop 135mm
Bull: Reach 80mm, Drop 130mm
Material: Uni-Directional Carbon
Weight: 205g (size 420mm, center to center)
Flare of drops: 3 degrees
Graphics on both sides to mark where STIs should be placed
Graphics on both sides to mark where to finish wrapping bar tape
Your shoulder width should determine your handlebar width, choose from the following center-center measurements: 400/420/440/460mm
As ridden at UCI World Tour level by AG2R Pro Cycling Team
Product Data

Road: Yes
The application of The Spine Concept™ to handlebar shape is the result of fi’zi:k’s research with riders of 3 UCI World Tour Teams that were riding fi’zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.

Just as your choice of fi’zi:k Spine Concept™ saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi’zi:k offers this same concept to find your most comfortable handlebar shape.

The Snake Handlebar
If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach (85mm) and deeper, classic-style drop (140mm).

The Chameleon Handlebar
If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach (85mm) but a shallower, more ergonomic-style drop (135mm).

The Bull Handlebar
If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach (80mm) and a shallower, more ergonomic-style handlebar drop (130mm).

 

 


 

The Cyrano R3 Handlebar

cyrano-handlebar_r3_bull

The Cyrano R3 is a high-end alloy handlebar, made from Ergal aluminum (7075-T6) this is both strong and lightweight. The same Spine Concept™ guidelines that helps you choose your saddle is used to find your most comfortable handlebar shape.

Top Features of the Fizik Cyrano R3 Road Handlebar

Spine Concept™ guidelines to help you choose your most comfortable road handlebar shape
Availble in three different drops and reach
Snake: Reach 85mm, Drop 140mm
Chameleon: Reach 85mm, Drop 135mm
Bull: Reach 80mm, 130mm
Material: Ergal Aluminum (7075-T60
Weight: 245g (size 420mm, center to center)
Flare of drops: 3 degrees
Graphics on both sides to mark where STIs should be placed
Graphics on both sides to mark where to finish wrapping bar tape
Your shoulder width should determine your handlebar width, choose from the following center-center measurements: 400/420/440/460mm
As ridden at UCI World Tour level by AG2R Pro Cycling Team
Product Data

Road: Yes
The application of The Spine Concept™ to handlebar shape is the result of fi’zi:k’s research with riders of 3 UCI World Tour Teams that were riding fi’zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.

Just as your choice of fi’zi:k Spine Concept™ saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi’zi:k offers this same concept to find your most comfortable handlebar shape.

The Snake Handlebar
If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars. You will prefer the Snake Handlebar because it has a longer reach (85mm) and deeper, classic-style drop (140mm).

The Chameleon Handlebar
If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to. You will prefer the Chameleon Handlebar because it has a longer reach (85mm) but a shallower, more ergonomic-style drop (135mm).

The Bull Handlebar
If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to. You will prefer the Bull Handlebar because it has a shorter reach (80mm) and a shallower, more ergonomic-style handlebar drop (130mm).

 


 

The Cyrano R5 Handlebar

cyrano-handlebar_bull-r5

The Cyrano R5 is the entry-point alloy handlebar from fi’zi:k. Made from 6061 Aluminum, this is both strong and lightweight.

Top Features of the Fizik Cyrano R5 Handlebar

Features
Material: 6061 Aluminum
Weight: 310g +/-5% (size 420mm, center to center)
Flare of drops: 3 degrees
Product Data

Road: Yes
Just as your choice of fi’zi:k Spine Concept™ saddle shape is guided by your degree of spinal flexibility and subsequent pelvic rotation, fi’zi:k offers this same Spine Concept™ guideline to help you choose your most comfortable road handlebar shape.

The application of The Spine Concept™ to handlebar shape is the result of fi’zi:k’s research with riders of 3 UCI World Tour Teams that were riding fi’zi:k saddles. A correlation was found between the saddle shape each rider was using and the handlebar shape they were riding.

Your shoulders’ width should determine your handlebar width. Choose from the following center-center measurements: 400/420/440/460mm. Fi’zi:k handlebars widths are measured center-to-center ‘on the tops’ (behind where the STIs are attached to the bar). They are NOT measured center-to-center ‘on the drops’ (between the center of each bar plug).

The Snake Handlebar

If you are very spinally flexible (far less than 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Snake. You are better able to reach further and get down lower to use the full radius of more rounded, classic-style, deeper-drop handlebars.
You will prefer the Snake Handlebar because it has a longer reach (85mm) and deeper, classic-style drop (140mm).

The Chameleon Handlebar

If you have an intermediate degree of spinal flexibility (approximately 90 degrees between your straight legs and your back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a chameleon. You are better able to reach further, but perhaps you can’t get down quite as low on the handlebar drops as a Snake would be able to.
You will prefer the Chameleon Handlebar because it has a longer reach (85mm) but a shallower, more ergonomic-style drop (135mm).

The Bull Handlebar

If you have a relatively low degree of spinal flexibility (more than 90 degrees between your straight legs and back when bending over as far as you can, keeping your legs straight a shoulders’ width apart), you are a Bull. You will not be able to reach as far or bend as low as a Snake or a Chameleon would be able to.
You will prefer the Bull Handlebar because it has a shorter reach (80mm) and a shallower, more ergonomic-style handlebar drop (130mm).


 

The Cyrano R1 Stem

cyrano-r1-stem

 

Cyrano Stem: The fi’zi:k stem is designed to form the cockpit when fitted with the Cyrano Handlebar and Seatpost. It is made using a combination of Ergal Aluminium and Anticorodal Aluminium.
Ergal is a 7075-series aluminum with a high strength-to-density ratio, this material has the highest level of stiffness. Ergal also has good fatigue resistance, particularly important in cockpits.
The Cyrano Stem is available in a choice of seven different lengths ranging from 70mm to 130mm, and in a choice of drop angles: 7% and 20%. When combined with the correct choice of Cyrano handlebars, specified according to the Spine Concept system, you can ensure high-performance, long-lasting cockpit with the perfect fit.
It weights just 128g (110mm – 7°).

Top Features of the Fizik Cyrano R1 Road Stem

Material: Ergal Aluminum (7075-T6)
Clamp diameter: 31.8mm
Bolts: Titanium Torx bolts
Length: 70, 80, 90, 100, 110, 120, 130mm (except no 70mm in +/-20 degree angle)
Angle: +/- 7 or +/-20 degrees
Stack height: 40mm
Weight: 128g (110mm/7 degrees)
Steerer: 1-1/8”
As ridden at UCI World Tour level by AG2R Pro Cycling Team

 


The Cyrano R5 Stem

cyrano-r5-stem

The Cyrano R5 is the entry-point alloy stem from fi’zi:k. Made from 6061 Aluminum, this is both strong and lightweight.

Top Features of the Fizik Cyrano R5 Stem

Features
Material: 6061 Aluminum
Bolts: Stainless steel bolts
Length: 80, 90, 100, 110, 120, 130mm
Angle: +/- 7
Stack height: 40mm
Weight: 152g +/-5%
Steerer size: 1-1/8”

 


The Cyrano R1 Seatpost

cyrano-seatpost_r1

The Cyrano R1 is a carbon seat post made from uni-directional carbon, this is both strong and lightweight with a high-gloss finish topped with a saddle rail friendly easily adjustable clamp. Designed to complement fizik Cyrano handlebars and stems.

Top Features of the Fizik Cyrano R1 Carbon Seat Post

Easy adjustable and quick to install a saddle into
Designed specifically to be saddle rail friendly
Wide range of fore-aft adjustment due to top part of the clamp is shorter than the base
Seatpost can be run back to front allowing the rider to be closer to the bars in triathlon or time trials
Saddle clamp has a flat top with no screws protruding meaning there is no danger of reducing saddle comfort
Seat post clamp parts heat-treated for 3 times the industry standard, making them durable and corrosion-resistant
Material: Carbon Filament Wound Quill / Ergal Aluminum (7075-T6) clamp
Bolts: Stainless steel
Diameter: 27.2/30.9/31.6
Length: 270/330/400mm
Layback: 25mm
Weight: 230 g (330 mm – 27.2 mm)
As ridden at UCI World Tour level by AG2R Pro Cycling Team
Product Data

Weight (g): 230
Road: Yes
About Seat Posts

A good quality seat post will save weight and hold your saddle securely. Seatposts are made in various materials, alloy and carbon being the two most common, alloy posts are lightweight, durable and cost efficient, while carbon posts are the popular choice for top end machines. Seat posts vary in where they hold the saddle relative to their own center line so make sure you have enough adjustment on your saddle rails to allow for this or you could end up with your saddle too far forwards. A seat post needs to fit your frame exactly and are measured by as little as 0.2mm. When choosing a new one, either read off the measurement from your old seat post or measure it carefully with a vernier caliper. Make sure you lubricate the frame (unless they’re carbon fiber) before insertion or you’ll struggle to get it out again.

 


The Cyrano R3 Seatpost

The Cyrano R3 is the high-end alloy seat post made Ergal aluminum (7075-T6), this is both strong and lightweight with a saddle rail friendly clamp which is quick and easy to adjust Designed to perfectly complement fizik Cyrano handlebars and stems.

Top Features of the Fizik Cyrano R3 Seat Post

Easy adjustable and quick to install a saddle into
Designed specifically to be saddle rail friendly
Wide range of fore-aft adjustment due to top part of the clamp is shorter than the base
Slightly ovalised internally to increases strength whilst keeping weight to a minimum
Saddle clamp has a flat top with no screws protruding meaning there is no danger of reducing saddle comfort
Seatpost clamp parts heat-treated for 3 times the industry standard, making them durable and corrosion-resistant
Material: Ergal Aluminum (7075-T6)
Bolts: Stainless steel
Diameter: 27.2/31.6
Length: 270/400mm
Layback: 25mm
Weight: 215g (31.6mm x 270mm)
As ridden at UCI World Tour level by AG2R Pro Cycling Team
Product Data

Weight (g): 215
Road: Yes
If required, the seatpost can be run back to front so to allow the rider to be closer to the bars in triathlon or time trial events.

 


 

The Cyrano R5 Seatpost

cyrano-r5-post

The Cyrano R5 is the entry-point alloy seat post from fi’zi:k. Made from 6061 Aluminium, this is both strong and lightweight. Designed to perfectly complement fi’zi:k Cyrano Handlebars and Stems.

Top Features of the Fizik Cyrano R5 Seat Post

Features
Material: 6061 Aluminium
Bolts: Stainless steel
Diameter: 27.2/31.6
Length: 270/400mm
Layback: 25mm
Weight: 225g +/-5% (31.6mm x 270mm)
Product Data

MTB: Yes
Road: Yes
The rail-friendly saddle clamp design allows for even dispersal of the clamping load whilst offering extensive fore-aft adjustment. This is done by using a top part of the clamp that is shorter than the base.

The saddle clamp has a flat top with no screws protruding. This means there is no danger of reducing saddle comfort derived from a dynamic saddle base that might otherwise be restricted from moving.

The post can be used back to front, releasing the adjuster wheel all the way. This allows the rider to be closer to their bars in triathlon or time trials. The round shaft is slightly ovalised, using thicker material fore and aft, thinner to each side. This optimal material distribution increases strength whilst keeping weight to a minimum.

All seat post clamp parts are heat-treated for 3 times the industry standard, making them particularly durable and corrosion-resistant.